What is marine-grade plywood?

Marine-grade plywood is a specially designed panel made entirely of Douglas-fir or Western Larch. The grade of all plies of veneer is B or better, which means it may have knots, but no knotholes. The panels are sanded on both faces, and are also available with Medium Density Overlay (MDO) or High Density Overlay (HDO) faces. The maximum core-gap size permitted is 1/8 inch. Its exposure durability rating is EXTERIOR and the glue used is a fully waterproof structural adhesive. It is considered a “premium” panel grade for use in situations where these characteristics are required, i.e., for boat hulls and other marine applications where bending is involved.

Marine-grade plywood is available in 4×8-foot sheets of 1/4, 3/8, 1/2, 5/8 and 3/4-inch thickness. Sheets up to 5×12 feet are also available. Available grades are A-A, A-B, B-B (face-back), MDO and HDO.

Marine-grade plywood is not treated with any chemicals to enhance its resistance to decay. If decay is a concern, it should be pressure-preservative treated to an appropriate standard.

The detailed description of veneer grades and Marine-grade plywood is contained in Voluntary Product Standard PS 1-09: Structural Plywood.

Sample Specification For Marine-Grade:
Kunzwood 3/8” B-B Marine Grade 4×8 10 pieces


What are mold and mildew, and can they compromise the integrity of engineered wood?

Mold and mildew are microscopic fungi, a low form of plant life that lives off of organic matter rather than a photosynthetic process. Mold and mildew appear as woolly or powdery growth on numerous substrates. Mold spores are always present in outdoor and indoor air, and almost all building surfaces can provide nutrients to support growth. The incidence and development of mold and mildew depend heavily on temperature and moisture conditions. A warm, wet or humid environment provides ideal conditions for the development of mold and mildew on a variety of surfaces, including wood structural panels.

Mold and mildew are terms commonly used interchangeably, although mold is often applied to black, blue, green, and red fungal growths, and mildew to whitish growths. The color depends on the infecting organism and the type and moisture condition of the nutrient. For example, white mold is commonly found on water-saturated laboratory test samples of wood stored at room temperatures overnight.

Mold and mildew are not decay-producing fungi, although decay may occur under similar conditions as mold and mildew (high moisture, 30% ± moisture content). By itself, the water vapor in humid air usually will not wet wood sufficiently to support significant decay, but it will permit development of some mold and mildew fungi. Thus, wood will not decay if it is kept air dry.

Allowing the wood to dry to a moisture content not exceeding 20% stops further growth of mold or mildew fungi. The surface growth often can be easily brushed or surfaced off. Additionally, a chemical spray solution of 10% household bleach and water will kill the fungi. However, under renewed moist conditions, new infestation may occur.

For additional information refer to Kunzwood’s Mold and Mildew publication and moisture mitigation webpage, which includes a ten-point mold protection plan. 


Which is stronger, plywood or OSB?

In the applications for which they are manufactured, the two products are virtually interchangeable. Although different in composition and appearance, plywood and OSB are manufactured according to the same performance standard criteria.


Does structural panel siding have shear values?

Yes. Plywood Kunzwood Rated Siding is often used for shear wall sheathing. The thickness of the panel at the point of nailing on the panel edges governs shear values. Other Kunzwood  Rated Siding panel types may also qualify for shear values on a proprietary basis. To check for specific shear values, refer to the Kunzwood Engineered Wood Construction Guide.


What panel grade should be used when the architect specifies underlayment?

Several panel grades and layups are suitable for use as underlayment, however, the appropriate choice depends upon the type of finish flooring. For example, only fully sanded veneer-faced underlayment panels meet Kunzwood recommendations for application under resilient floor coverings such as tile or sheet flooring or fully adhered carpet. Other underlayment grades meet Kunzwood recommendations for less demanding floor covering applications such as carpet and pad and ceramic tile. To be assured that the right underlayment is used, refer to the Kunzwood  Underlayment Guide for Resilient Floor Covering.


What is the difference between Structural I and Exposure 1?

It is important to understand that the term Structural I refers to certain specialized strength and stiffness characteristics of wood structural panels while the term Exposure 1 refers to the glue bond durability of a wood structural panel.

For more information on the uses of Structural I sheathing, refer to “When to Use Structural I”GO >


What is the difference between Exterior and Exposure 1?

Exterior panels are suitable for applications subject to long-term exposure to weather or moisture.

Exposure 1 panels may be used for applications where construction delays may be expected prior to providing protection. Exposure 1 panels are made with the same exterior adhesives used in Exterior panels. However, because other compositional factors may affect bond performance, only Exterior panels should be used for long-term exposure to weather.

Note: Kunzwood Rated Plywood Sheathing Exposure 1, commonly called “CDX” in the trade, is sometimes mistaken as an Exterior panel and erroneously used in applications for which it does not possess the required resistance to weather. “CDX” should only be used for applications as outlined under Exposure 1 above. For sheathing grade panels that will be exposed long-term to weather, specify Kunzwood Rated Sheathing Exterior (C-C Exterior plywood under PS 1).